top of page

We have a range of pre-printed, ready-to-press papers to meet everyone's needs or we can print a custom design.

 

As a guide, you can fit on a 29 x 100cm sheet.
8 x 16oz wraps 
or
5 x 24oz wraps
or
3 x 40oz wraps

 

Build your 1 Meter Gang Sheet here: https://designer.antigro.com/en/init/urbanrose-uv-dtf-29d5x100

 

Urban Rose Image Gallery: https://www.urbanrose.art/

 

Using your own image: Upload on this page.

 

What is UV DTF?

Ultraviolet (UV) DTF Printing refers to a new printing method that uses ultraviolet curing technology to create designs on films. These designs can then be transferred like a sticker onto hard and irregular-shaped objects by pressing down with fingers and then peeling off the film.

The colour of the design is bright and clear, and after the transfer, it is durable and does not scratch or wear off quickly. It is also suitable for outdoor objects as they are durable and resistant to scratch and wear over time.

 

UV DTF printing is versatile due to the type of surfaces the designs can go on, such as metal, leather, wood, paper, plastic, ceramic, glass, etc. It can even be transferred onto irregular and curved surfaces. It is also possible to transfer designs when the object is underwater.

 

  • Permanent and waterproof
  • High quality print
  • Apply to most hard surfaces
  • Size - 30 x 100cm

 

Instructions for applying UV DTF wraps:

  • Use a squeegee or scraper and firmly scrape the front of the UV DTF print to make sure the print has adhered to the transfer film
  • Clean your blank substrate (item to be applied onto) with isopropyl alcohol
  • Check to ensure the wrap fits your substrate and please ensure you position it properly as the wrap cannot be moved/ removed once applied.
  • Remove the white backing by curling it back against itself- go slow and do not rush.
  • Place the transfer film on your substrate in the correct position.
  • Rub over the entire transfer paper again and once you are confident that all the air bubbles have been removed, gently peel off the clear transfer film by curling it back against itself - go slow and do not rush.
  • Rub over the substrate to check the image has been fully applied and stuck down.

 

Care instructions:

  • Hand wash only, do not soak or put in the dishwasher
  • Let the UV DTF wrap cure for a minimum of 48 hours before using

 

Disclaimer

At Urban Rose, we understand that sometimes mistakes can happen while using our products. It is important to note that any issues arising due to user error will not be covered or compensated. We recommend that users carefully read and follow all instructions provided to ensure proper use of our products. If you are unsure about any aspect of our products, please do not hesitate to contact us for assistance. We cannot be held responsible for any damages or losses resulting from user error.

 

 

Build your 1 Meter Gang Sheet here: https://designer.antigro.com/en/init/urbanrose-uv-dtf-meter

 

Urban Rose Image Gallery: https://www.urbanrose.biz/image-gallery

 

Using your own image: Upload on this page.

 

Instructions on how to build a gang sheet: https://www.youtube.com/watch?v=ZWuR9ujsCWk

Custom UV DTF Transfers - 29 x 125cm

$23.95Price

Buy 5 & SAVE

    bottom of page