top of page

Our UV DTF Wrap pack includes 8 x 16oz ready to transfer wraps. 

 

Packs are FINAL Sale. No Refunds or Returns

Glass Can not included, Printed images only.

 

What is UV DTF?

Ultraviolet (UV) DTF Printing refers to a new printing method that uses ultraviolet curing technology to create designs on films. These designs can then be transferred like a sticker onto hard and irregular-shaped objects by pressing down with fingers and then peeling off the film.

The colour of the design is bright and clear, and after the transfer, it is durable and does not scratch or wear off quickly. It is also suitable for outdoor objects as they are durable and resistant to scratch and wear over time.

 

UV DTF printing is versatile due to the type of surfaces the designs can go on, such as metal, leather, wood, paper, plastic, ceramic, glass, etc. It can even be transferred onto irregular and curved surfaces. It is also possible to transfer designs when the object is underwater.

 

  • Permanent and waterproof
  • High-quality print
  • Size approximately 23.62cm X 10.84cm
  • Apply to most hard surfaces

 

Instructions for applying UV DTF wraps:

  • Use a squeegee or scraper and firmly scrape the front of the UV DTF print to make sure the print has adhered to the transfer film
  • Clean your blank substrate (item to be applied onto) with isopropyl alcohol
  • Check to ensure the wrap fits your substrate and please ensure you position it properly as the wrap cannot be moved/ removed once applied.
  • Remove the white backing by curling it back against itself- go slow and do not rush.
  • Place the transfer film on your substrate in the correct position.
  • Rub over the entire transfer paper again and once you are confident that all the air bubbles have been removed, gently peel off the clear transfer film by curling it back against itself - go slow and do not rush.
  • Rub over the substrate to check the image has been fully applied and stuck down.

 

Care instructions:

  • Hand wash only, do not soak or put in the dishwasher
  • Let the UV DTF wrap cure for a minimum of 48 hours before using

 

Disclaimer

At Urban Rose, we understand that sometimes mistakes can happen while using our products. It is important to note that any issues arising due to user error will not be covered or compensated. We recommend that users carefully read and follow all instructions provided to ensure proper use of our products. If you are unsure about any aspect of our products, please do not hesitate to contact us for assistance. We cannot be held responsible for any damages or losses resulting from user error.

 

UV DTF 16oz Wraps Pack #35 - Printed and sent to your door

$24.95 Regular Price
$22.46Sale Price
    bottom of page